See the Wheel in Action!!! (3.5 MB)
FW01--Cutting_Blank
FW02--Blanks_Cut
FW03--Drilling_Pilot_Holes
FW04--Drilling_Mounting_Holes
FW05--Blanks_with_Mounting_Holes
FW06--Blanks_Mounted_and_Centered
FW07--Drilling_Center_Hole
FW08--Center_Drilling_for_Filter_Slots
FW09--Pilot_Drilling_for_Filter_Slots
FW10--Rough_Drilling_for_Filter_Slots
FW11--Rough_Milling_for_Filter_Slots
FW12--Finish_Boring_of_Small_Hole
.jpg)
FW13--Finish_Boring_of_Slot_(note_shoulder_at_base_of_hole)
FW14--Steps_to_Make_Filter_Slot
FW15--Drilling_4-40_Screw_Holes
FW16--Drilling_Locator_Holes
FW17--Finished_on_the_Mill
FW18--Blanks_Milled_and_Drilled
FW19--Countersinking_and_Tapping
FW20--Who_Says_Cutting_Corners_is_Bad
FW21--Blanks_Mandrelled_for_Turning
FW22--Blanks_Turned_to_Size
.jpg)
FW23--Nice_and_Smooth_(for_now)
FW24--Finished_on_Lathe
FW25--Blanks_Turned_to_Spec
FW26--Indexing_Head_on_Horizontal_Mill
FW27--Blanks_Mounted
FW28--Cutter_Aligned
FW29--Setup_Complete
FW30--Test_Touch
FW31--First_Few_Teeth
FW32--Rough_Cut_1
FW33--Rough_Cut_2
FW34--Finish_Cut
FW35--Finished_Cutting_Teeth
FW36--Tools_I_made_and_the_cutter
FW37--Anodizing
FW38--Dying and Sealing